View HMC1165LP5ETR_8878140.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

11.07 ghz to 11.62 ghz, mmic vco with half frequency output data sheet hmc1165 rev. 0 document feedback information furnished by analog devices is believed to be accurate and reliable. however, no responsibility is assumed by analog devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. one technology way, p.o. box 9106, norwood, ma 02062-9106, u.s.a. tel: 781.329.4700 ?2015 analog devices, inc. all rights reserved. technical support www.analog.com features dual output frequency range f out = 11.07 ghz to 11.62 ghz f out /2 = 5.535 ghz to 5.810 ghz output power (p out ): 8 dbm single-sideband (ssb) phase noise: ?113 dbc/hz at 100 khz no external resonator needed rohs-compliant, 5 mm 5 mm, 32-lead lfcsp: 25 mm2 applications point to point and multipoint radios test equipment and industrial controls very small aperture terminals (vsats) functional block diagram 17 1 3 4 2 9 nc nc nc nc 5 6 gnd nc 7 nc 8 nc nc 18 nc 19 rfout 20 nc 21 v cc 22 nc 23 nc 24 nc nc 1 2 rfout/2 1 1 gnd 1 0 nc 1 3 nc 1 4 nc 1 5 nc 1 6 nc 2 5 nc 2 6 nc 2 7 nc 2 8 nc 2 9 vtune 3 0 nc 3 1 nc 3 2 nc hmc1165 13383-001 figure 1. general description the hmc1165 is a monolithic microwave integrated circuit (mmic), voltage controlled oscillator (vco) that integrates a resonator, a negative resistance device, and a varactor diode, and features a half frequency output. because of the monolithic construction of the oscillator, the output power and phase noise performance are excellent over temperature. the output power is 8 dbm typical from a 5 v supply voltage. the vco is housed in a rohs-compliant lfcsp and requires no external matching components.
hmc1165* product page quick links last content update: 11/01/2016 comparable parts view a parametric search of comparable parts evaluation kits ? hmc1165 evaluation board documentation data sheet ? hmc1165: 11.07 ghz to 11.62 ghz, mmic vco with half frequency output data sheet design resources ? hmc1165 material declaration ? pcn-pdn information ? quality and reliability ? symbols and footprints discussions view all hmc1165 engineerzone discussions sample and buy visit the product page to see pricing options technical support submit a technical question or find your regional support number * this page was dynamically generated by analog devices, inc. and inserted into this data sheet. note: dynamic changes to the content on this page does not constitute a change to the revision number of the product data sheet. this content may be frequently modified.
hmc1165 data sheet rev. 0 | page 2 of 11 table of contents features .............................................................................................. 1 ? applications ....................................................................................... 1 ? functional block diagram .............................................................. 1 ? general description ......................................................................... 1 ? revision history ............................................................................... 2 ? specifications ..................................................................................... 3 ? absolute maximum ratings ....................................................... 4 ? esd caution .................................................................................. 4 ? pin configuration and function descriptions ............................. 5 ? interface schematics .....................................................................6 ? typical performance characteristics ..............................................7 ? applications information .................................................................9 ? evaluation printed circuit board (pcb) ..................................... 10 ? bill of materials ........................................................................... 10 ? packaging and ordering information ......................................... 11 ? outline dimensions ................................................................... 11 ? ordering guide .......................................................................... 11 ? revision history 10/15revision 0: initial version
data sheet hmc1165 rev. 0 | page 3 of 11 specifications t a = ?40c to +85c, v cc = 5 v, unless otherwise noted. table 1 . parameter min typ max unit test conditions/ comments frequency range output frequency ( f o ut ) 11.07 11.62 ghz half output frequency ( f o ut /2 ) 5.535 5.810 ghz drift rate 1.2 mhz/c pulling 0.35 mhz p -p pulling into a 2.0:1 voltage standing wave ratio ( vswr ) pushing 10 mhz/v at vtune = 5 v output power (p out ) rfout 4.5 8 11.5 dbm rfout/2 2 5 10 dbm supply current (i cc ) 185 ma v cc = 4.75 v 1 60 210 280 ma v cc = 5.00 v 230 ma v cc = 5.25 v harmonics, subharmonics 1/2 3 5 dbc 3/2 16 dbc second 1 4 dbc third 25 dbc tuning voltage (vtune) 2 13 v sensitivity 70 310 mhz/v tune port leakage current 10 a vtune = 13 v output return loss 4 db ssb phase noise 10 khz offset ?88 ?82 dbc/hz 100 khz offset ?113 ?109 dbc/hz
hmc1165 data sheet rev. 0 | page 4 of 11 absolute maximum rat ings table 2 . parameter rating v cc 5.5 v dc vtune 0 v to 15 v temperature operating ?40c to +85c storage ?65c to +150c nominal junction ( t o maintain 1 m illion h ours mean time to failure ( mttf ) ) 135c nominal junction ( t a = 85c) 117c maximum reflow temperature (msl3 rating) 260c thermal resistance (junction to ground paddle) 27.6 c/w esd sensitivity (human body model) class 1a stresses at or above those listed under absolute maximum ratings may cause permanent damage to the product. this is a stress rating only; functional operation of the product at these or any other conditions above those indicated in the operational section of this specification is not implied. operation beyond the maximum operating conditions for extended periods may affect product reliability. esd caution
data sheet hmc1165 rev. 0 | page 5 of 11 pin configuration an d function descripti ons 17 1 3 4 2 9 nc nc nc nc 5 6 gnd nc 7 nc 8 nc nc 18 nc 19 rfout 20 nc 21 v cc 22 nc 23 nc 24 nc nc 12 rfout/2 11 gnd 10 nc 13 nc 14 nc 15 nc 16 nc 25 nc 26 nc 27 nc 28 nc 29 vtune 30 nc 31 nc 32 nc hmc1165 top view (not to scale) notes 1. no connect. however, these pins can be connected to rf/dc ground without affecting the performance of the device. 2. exposed pad. the package bottom has an exposed metal pad that must be connected to rf/dc ground. 13383-002 figure 2. pin configuration table 3 . pin function descriptions pin no. mnemonic description 1 to 4, 6 to 10, 13 to 18, 20, 22 to 28, 30 to 32 nc no connect . h owever, t hese pins can be connected to rf/dc ground without affecting the performance of the device. 5, 11 gnd ground . these p ins must be connected to rf/dc ground. 12 rfout/2 half frequency output. this pin is ac - coupled. 19 rfout rf output. this pin is ac - coupled. 21 v cc supply voltage (5 v). 29 vtune control voltage and modulation input. the modulation bandwidth is dependent on the drive source impedance. ep exposed pad. the package bottom has an exposed metal pad that must be connected to rf/dc ground.
hmc1165 data sheet rev. 0 | page 6 of 11 interface schematics rfout/2 13383-003 figure 3. rfout/2 interface rfout 13383-004 figure 4. rfout interface v cc 42pf 13383-005 figure 5. v cc interface 4pf 3nh 54pf v tune 13383-006 figure 6. vtune interface gnd 13383-007 figure 7. gnd interface
data sheet hmc1165 rev. 0 | page 7 of 11 typical performance characteristics 12.5 12.0 11.5 11.0 10.5 10.0 9.5 9.0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 output frequency (ghz) tuning voltage (v dc) +85c +25c ?40c 13383-008 figure 8. output frequency vs. tuning voltage 10 9 8 7 6 5 4 3 2 1 0 output power (dbm) 0 1 2 3 4 5 6 7 8 9 10 11 12 13 tuning voltage (v dc) +85c +25c ?40c 13383-009 figure 9. output power vs. tuning voltage 900 800 700 600 500 400 300 200 100 0 sensitivity (mhz/v) 0 1 2 3 4 5 6 7 8 9 10 11 12 13 tuning voltage (v dc) +85c +25c ?40c 13383-010 figure 10 . sensiti vity vs. tuning voltage supply current (ma) 0 1 2 3 4 5 6 7 8 9 10 11 12 13 tuning voltage (v dc) 180 185 190 195 200 205 210 215 220 225 230 235 240 245 250 +85c +25c ?40c 13383-0 1 1 figure 11 . supply current vs. tuning voltage 6.2 6.0 5.8 5.6 5.4 5.2 5.0 4.8 4.6 rfout/2 output frequency (ghz) 0 1 2 3 4 5 6 7 8 9 10 11 12 13 tuning voltage (v dc) +85c +25c ?40c 13383-012 figure 12 . rfou t/2 output frequency vs. tuning voltage 10 9 8 7 6 5 4 3 2 1 0 rfout/2 output power (dbm) 0 1 2 3 4 5 6 7 8 9 10 11 12 13 tuning voltage (v dc) +85c +25c ?40c 13383-013 figure 13 . rfout/2 output power vs. tuning voltage
hmc1165 data sheet rev. 0 | page 8 of 11 ?70 ?75 ?80 ?85 ?90 ?95 ?100 ?105 ?110 ?115 ?120 ssb phase noise (dbc/hz) 0 1 2 3 4 5 6 7 8 9 10 11 12 13 tuning voltage (v dc) +85c +25c ?40c 10khz 100khz 13383-014 figure 14 . ssb phase n oise vs. tuning voltage ?10 ?20 ?30 ?40 ?50 ?60 ?70 ?80 ?90 ?100 ?110 ?120 ?130 ?140 ?150 ?160 ?170 100 1k 10k 100k 1m 10m ssb phase noise (dbc/hz) offset frequency (hz) +85c +25c ?40c 13383-015 figure 15 . ssb phase noise vs. offset frequency at vtune = 5 v
data sheet hmc1165 rev. 0 | page 9 of 11 applications information the hmc1165 serves as the local oscillator (lo) in microwave synthesizer applications. the primary applications are point to point microwave radios, military, radars, test and measurement, as well as industrial and medical equipment. the low phase noise allows higher orders of modulation and offers improved bit error rates in communication systems, whereas the linear, monotonic tuning sensitivity allows a stable loop filter design. the higher output power minimizes the gain required to drive subsequent stages. the half frequency output reduces the input frequency to the prescaler without the addition of residual phase noise to the input of the phase-locked loop synthesizer. 13383-017 host sck sdi sen synth loop filter ref xrefp vco input cp vtune rfout rfout/2 figure 16. typical application diagram
hmc1165 data sheet rev. 0 | page 10 of 11 evaluation printed circuit board (pcb) 13383-016 figure 17. evaluation board the circuit board used in an application uses rf circuit design techniques. ensure that the signal lines have 50 impedance and that the package ground leads and backside ground paddle are connected directly to the ground plane. use a sufficient number of via holes to connect the top and bottom ground planes. the evaluation circuit board shown in figure 17 is available from analog devices, inc., upon request. bill of materials table 4. bill of materials, ev1hmc1165lp5 item description j1 to j4 pcb mount sma rf connectors j5, j6 2 mm dc headers c1 to c3 100 pf capacitors, 0402 package c4 1000 pf capacitor, 0402 package c5 to c7 2.2 f tantalum capacitors c8 0.01 f capacitor, 0603 package u1 hmc1165 vco pcb 1 110225 evaluation board 2 1 circuit board material is rogers 4350. 2 reference this number when ordering the complete evaluation pcb.
data sheet hmc1165 rev. 0 | page 11 of 11 packaging and ordering information outline dimensions 03-04-2015-a 1 0.50 bsc bottom view top view pin 1 indicator 32 9 16 17 24 25 8 exposed pad p i n 1 i n d i c a t o r seating plane 0.05 max 0.02 nom 0.20 ref coplanarity 0.08 0.30 0.25 0.18 5.10 5.00 sq 4.90 1.00 0.90 0.80 for proper connection of the exposed pad, refer to the pin configuration and function descriptions section of this data sheet. 0.45 0.40 0.35 0.20 min 3.80 3.65 sq 3.50 compliant to jedec standards mo-220-vhhd-4. pkg-000000 3.50 ref figure 18. 32-lead lead frame chip scale package [lfcsp_vq] 5 mm 5 mm body, very thin quad (hcp-32-1) dimensions shown in millimeters ordering guide model 1 temperature range msl rating 2 package description package option qty. brand 3 hmc1165lp5e ?40c to +85c msl3 32-lead lfcsp_vq hcp-32-1 xxxx h1165 HMC1165LP5ETR ?40c to +85c msl3 32-lead lfcsp_vq, 7 tape and reel hcp-32-1 500 xxxx h1165 ev1hmc1165lp5 evaluation board 1 the hmc1165lp5e and hmc1165lp5et r are rohs compliant parts. 2 see the absolute maximum ratings section, table 2. 3 xxxx is a placeholder for the 4-digit lot number. ?2015 analog devices, inc. all rights reserved. trademarks and registered trademarks are the property of their respective owners. d13383-0-10/15(0) www.analog.com/hmc1165

▲Up To Search▲

Price & Availability of HMC1165LP5ETR

	To Download HMC1165LP5ETR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .